Duke's Blog

Learning is a life long journey.


DIY small pcb test fixture

For test the tiny MAX10 FPGA module -- CDPGA-H, I make a fixture, finished result:

First, use a blade back to saw the PCB to 4 pieces:

Insert the probe, apply solder paste to the joint, and solder with a heat gun:

Soldering the bottom in the same way:

Solder the wire, or use the probe sleeve with wire directly:

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.


Please visit the original link: /diy-small-pcb-test-fixture